BFSRX - DEX-O-TEX DEE CEE FINISH(COMP B)

  • MSDS: BFSRX
  • Manufacturer: CROSSFIELD PRODUCTS CORP
  • Product Name: DEX-O-TEX DEE CEE FINISH(COMP B)
  • National Stock Number: 5610-00-852-1907
Product Identification

Product ID:DEX-O-TEX DEE CEE FINISH(COMP B)
MSDS Date:01/01/1987
FSC:5610
NIIN:00-852-1907
Kit Part:Y
MSDS Number: BFSRX

Responsible Party
CROSSFIELD PRODUCTS CORP
140 VALLEY ROAD
ROSELLE PARK, NJ 07204-1402
US

Cage: 88167

Contractor
CROSSFIELD PRODUCTS CORP
ROSELLE PARK, NJ 07204-1402 US

Telephone: 908-245-2800

Cage: 88167

Ingredients

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

OSHA PEL SEE TABLE Z3

ACGIH TLV: 6 MG/CUM(DUST)

Hazards

Effects of Overexposure:EYE:MINOR BURNING.SKIN:MINOR RASH.INHAL:TOXIC
EFFECTS.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR,GIVE O*2 IF NEC,CALL MD.EYES:FLUSH
W/ WATER 15 MIN.CALL MD. SKIN WASH W/ SOAP & WATER,REMOVE
CONTAMINATED CLOTHING.INGEST:DO NOT INDUCE VOMITING.GIVE 1 PINT
LUKEWARM WATER,OB TAIN EMERGENCY MEDICAL TREATMENT.

Fire Fighting

Flash Point:116F,47C TCC
Autoignition Temp:Autoignition Temp Text:522F
Lower Limits:1.5
Upper Limits:10.2
Extinguishing Media:CO*2,FOAM
Fire Fighting Procedures:WEAR SCBA.CLOSED CONTNR CAN EXPLO IF EXPOS TO
HIGH TEMP.
Unusual Fire/Explosion Hazard:VAP RELEASED ABOVE FLASH POINT.CAN BURN
OR EXPLO W/ IGNITION SOURCE.KEEP FROM WELDING/CUTTING TORCH.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.SPREAD
ABSORBANT MATERIAL & PLACE IN CLOSE CONTNR.WEAR PROTECTIVE
EQUIPMENT DURING CLEANUP.

Handling

Handling and Storage Precautions:KEEP FROM HEAT,SPARKS,OPEN FLAME.EYE &
CLOTHING PROTECTION SHOULD BE WORN DURING HANDLING.
Other Precautions:VAP HEAVIER THAN AIR

Exposure Controls

Ventilation:LOC EXHST,MECHANICAL
Protective Gloves:CHEM RESIST,RUB
Eye Protection:CHEM GOGGLES
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
MSDS PREP: 85326. PART B OF A 2 PART KIT. SPEC DATA: TYPE 2, COLOR:
GREEN. KEY1:F4.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:2.0
Vapor Density:4.7
Evaporation Rate & Reference:0.3(BUTYL ACETATE)
Solubility in Water:SLIGHT
Appearance and Odor:PIGMENTED LIQUID RESIN-SLIGHT AROMATIC ODOR
Percent Volatiles by Volume:21.0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,O*2,AIR.
Stability Condition to Avoid:HIGH TEMPERATURE
Hazardous Decomposition Products:CO,TOXIC GASES

Disposal

Waste Disposal Methods:DISPOSE IN SANITARY LANDFILL OR BURN IN
ACCORDANCE W/ FEDERAL,STATE,& LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.